PRESS RELEASE: Paid Content from Business Wire. The AP news staff was not involved in its creation.

Global 3D Printing Metal Market Size, Share & Trends Analysis Report 2019 - ResearchAndMarkets.com

 
Share

DUBLIN--(BUSINESS WIRE)--Apr 25, 2019--The “3D Printing Metal Market Size, Share & Trends Analysis Report By Form (Filament, Powder), By Product (Steel, Titanium, Nickel), By Application (Medical, Aerospace & Defense), And Segment Forecasts, 2019 - 2025" report has been added to ResearchAndMarkets.com’s offering.

The global 3D printing metals market size is expected to reach USD 3.05 billion by 2025, at a CAGR of 31.8% during the forecast period.

Increasing adoption of 3D printing as a mainstream manufacturing method and rising investments in research & development (R&D) of 3D metal printing are anticipated to fuel product demand. Use of 3D metal printing is prominent in the aerospace & defense industry owing to rapid prototyping and manufacturing speed offered by 3D printing.

The aerospace & defense (A&D) industry was an early adopter of the product. This is leading to high utilization of materials such as titanium and steel in this industry. 3D printing grants flexibility to produce complex equipment geometries, which are otherwise difficult to build using a traditional manufacturing.

The powder segment dominated the market in 2017. It is expected to progress at a higher CAGR in terms of volume over the forecast period. High packing density and spherical morphology of metal powders ensure good flowability that leads to consistent and predictable powder dosing and layers.

Titanium was the largest contributor to market growth in 2017, owing to its significant adoption in aerospace applications. Titanium-based alloys have a very high melting point and are strongly resistant to oxidation and acids. This is necessary for manufacturing critical aircraft parts. Moreover, aircraft designers are able to achieve higher thrust to weight of engine ratio due to high strength and low density of titanium.

North America emerged as the largest region in 2017 in terms of employing 3D printing metals. Presence of numerous aerospace companies are expected to stoke the growth of the regional market. Moreover, high defense expenditure across the region is anticipated to boost the utilization of the product in aerospace & defense.

The U.S. has been a major producer and consumer of 3D printing metals on a global scale. Presence of key industry players such as 3D Systems Corporation and ExOne GmbH is expected to drive the market on account of innovative product launches and expansion initiatives in the country. Moreover, increasing integration of advanced technologies such as 3D printing with several manufacturing processes has been escalating the growth of the market in the country.

Technological limitations of additive manufacturing for large-scale production of heavy parts are the primary factors restraining market growth. In addition, high-cost of printers and raw materials such as metal powders is also anticipated to negatively influence the growth of the market.

However, rising investments in R&D activities by academicians and companies are expected to facilitate cost reduction as well as increased utilization of the product. Major players in the global industry are involved in launching new products, joint ventures, and acquisitions to increase their customer reach in the international markets.

Further key findings from the report suggest:

  • Aerospace & defense is anticipated to witness the fastest growth at a CAGR of 34.2% over the forecast period, in terms of revenue, on account of reduced lead time offered by 3D printing and increasing demand for highly customizable parts
  • The titanium segment captured the highest revenue share of 63.0% in 2017 due to its high corrosion resistance, high tensile strength, and low density
  • The 3D printing metals market in Asia Pacific was valued at USD 79.7 million in 2017 with China and Japan emerging as major markets.
  • In terms of volume, the powder segment accounted for 92.6% of the market in 2017 owing to superior quality offered by metal powders for manufacturing process of metal parts
  • Key companies are attempting to provide superior quality products and expand their product portfolio. For instance, in September 2017, ExOne expanded its product offerings by announcing availability of 17-4PH stainless steel as a printable material.

Key Topics Covered:

Chapter 1 Methodology and Scope

Chapter 2 Executive Summary

Chapter 3 3D Printing Metals Market Variables, Trends & Scope

3.1 Market segmentation & scope

3.2 3D printing metals market value chain analysis

3.3 Raw material trend

3.3.1 Aluminum

3.3.2 Silver

3.3.3 Gold

3.3.4 Steel

3.3.5 Titanium

3.3.5.1 3D printing with titanium: Advantages and disadvantages

3.3.5.2 Titanium 3D printers and technologies

3.4 Market dynamics

3.4.1 Market driver analysis

3.4.1.1 Increasing demand for 3D printing

3.4.1.2 Increasing demand from aerospace and defense sector

3.4.2 Market restraint analysis

3.4.2.1 High material cost

3.5 Regulatory framework

3.6 Penetration & growth prospect mapping

3.7 3D printing metals market - PESTEL analysis

3.8 Industry analysis - Porter’s

Chapter 4 3D Printing Metals Market: Form Estimates & Trend Analysis

4.1 3D printing metals market: Form movement analysis

4.2 Powder

4.3 Filament

Chapter 5 3D Printing Metals Market: Application Estimates & Trend Analysis

5.1 3D printing metals market: Application movement analysis

5.2 Aerospace & defense

5.3 Automotive

5.4 Medical & Dental

5.5 Other applications

Chapter 6 3D Printing Metals Market: Product Estimates & Trend Analysis

6.1 Titanium

6.2 Nickel

6.3 Steel

6.4 Aluminum

6.5 Other Metals

Chapter 7 3D printing Metals Market: Regional Estimates & Trend Analysis, by Application

7.1 Regional Movement Analysis & Market Share, 2017 & 2025

7.2 North America Movement Analysis & Market Share, 2017 & 2025

7.3 Europe Movement Analysis & Market Share, 2017 & 2025

7.4 Asia Pacific Movement Analysis & Market Share, 2017 & 2025

7.5 Central & South America Movement Analysis & Market Share, 2017 & 2025

7.6 MEA Movement Analysis & Market Share, 2017 & 2025

Chapter 8 Competitive Landscape

8.1 Competitive Scenario

8.2 Market Positioning

8.3 Vendor Landscape

8.4 Strategy Framework

Chapter 9 Company Profiles

  • Arcam AB
  • ExOne GmbH
  • 3D Systems Corporation
  • Materialise NV
  • Renishaw PLC
  • Hoganas AB
  • Voxeljet AG
  • Carpenter Technology Corporation
  • Equispheres
  • GKN PLC
  • Sandvik AB
  • LPW Technology Inc.
  • Optomec Inc.
  • EOS GmbH Electro Optical Systems
  • Concept Laser GmbH

For more information about this report visit https://www.researchandmarkets.com/r/ip7f3n

View source version on businesswire.com:https://www.businesswire.com/news/home/20190425005430/en/

CONTACT: ResearchAndMarkets.com

Laura Wood, Senior Press Manager

[email protected]

For E.S.T Office Hours Call 1-917-300-0470

For U.S./CAN Toll Free Call 1-800-526-8630

For GMT Office Hours Call +353-1-416-8900

Related Topics:Metals and Minerals,3D Printing

KEYWORD:

INDUSTRY KEYWORD: TECHNOLOGY HARDWARE MANUFACTURING OTHER MANUFACTURING NATURAL RESOURCES MINING/MINERALS

SOURCE: Research and Markets

Copyright Business Wire 2019.

PUB: 04/25/2019 06:17 AM/DISC: 04/25/2019 06:17 AM

http://www.businesswire.com/news/home/20190425005430/en